|
    
|
      |
Air jet sieve 200 LS-N
|
Air jet sieve 200 LS-N
 |
Laboratory air jet sieve for the determination
of the particle size distribution of powdery materials
in the range of 25 µm to 2000 µm. |
|
For quality control as per DIN ISO
9000 ff. Automatic sieve identification. |
|
Software is available in compliance
with 21 CFR part 11. |
|
More www.airjetsieve.com |
|
Multi-processing system MP Zoom
with fluidised bed opposed jet mill AFG
|
Multi-processing system
4 processes:
|
Opposed jet milling with the 100 AFG
for materials up to Mohs' hardness 10. Fineness 2 µm
to 40 µm. |
|
Impact milling and classifying with
the 50 ZPS for materials up to Mohs' hardness 3,5. Fineness
8 µm to 120 µm. |
|
Fine classifying with the 50 ATP for
materials up to Mohs' hardness 10. Cut point range from
2 µm to 120 µm. |
|
Ultrafine comminution with the 100
AS in the superfine ange 5 µm to 30 µm. |
|
Spiral jet mill 50 AS
|
Ideal for the ultrafine size reduction on a laboratory scale
of dry materials of Mohs' hardness 3 and powder fineness of
5 µm t 40 µm. Suitable for high-grade pharmaceuticals
and fine-grade chemicals. |
Fine impact mill 100 UPZ
|
For fine and ultrafine grinding, for defibration and for cutting
materials of Mohs' hardness up to 3 and - dependent on the equipment
- powder fineness of approx. 100 µm to 1500 µm. |
Universal mill 25 MZ
|
For fine, coarse and preliminary crushing of materials with
a maximum Mohs' hardness of 3. Maximum feed size 40 mm x 40
mm. Throughputs up to 150 kg/h. Fineness in the range of 300
µm to 8000 µm. |
Laboratory wet mill
Type 90 AHM
|
Horizontal agitated ball mill designed for the wet grinding
of small to ultrasmall product batches down to the nano fineness
range. |
Laboratory classifier MZR
|
For analytical or preparative separations in the range 2 µm
to 80 µm . Separation range continuously adjustable. |
Multiplex zigzag classifier 1-40 MZM
|
For separations with freely selectable precision of cut in the
range of 100 µm to 6000 µm. Max. feed size 10 mm. |
Multi-Plex® ZIGZAG Classifier
|
|
Powder tester PTR
|
For analysis of the flow and flood characteristics of bulk materials
(gradient of slope, compressibility, angle of spatula, cohesion,
etc.). |
In-line particle size analyser
|
In collaboration with Malvern Ltd, a Spectris Company, we offer
in-line particle size analysers for measurements in a product
stream.
|
